INSUTEX CERAMIC FIBER TYPE STB HT
Insutex ceramic fiber product is manufactured from high quality pure ceramic fiber. Which classify temperature included 1260¡ãC and 1430¡ãC. Series product from bulk, yarn, cloth, tape, round braid, square braid, ladder tape, twisted rope, blanket, felt, paper, board, module, tubing, sleeving, etc. they reinforced with glassfiber, stainless steel wire or inconel wire. All of them are free of asbestos.

Ceramic fiber is ideal product used in asbestos replacement, high temperature furnace, flue line insulation and refractory.

Ceramic fiber contains approximately 18% organic fiber, which burns out at high temperature. But has no effect on the properties of the products.

Classify temp 1260 ¡ãC (2300¡ãF) 1430 ¡ãC (2610¡ãF)
Using temp ¡Ü1000¡ãC ¡Ü1350¡ãC
Melting temp 1740¡ãC 1760¡ãC
Chemical composition (%)
AL2O3 46% 28-32%
SiO2 53% 52-56%
ZrO2   14-18%
Diameter of Ceramic fiber
3-4 micron
Loss on ignition 18%
Thermal Conductivity
<0.18W/m ¡ã K at 1000 ¡æ
Shrinkage (24hr)
3% at 1100 ¡ãC 1.7% at 1100 ¡ãC
Temperature limit of insert
Glass: 650 ¡ãC Stainless Steel: 1000 ¡ãC
Fe-Cr wire: 1100 ¡ãC Inconnel wire: 1200 ¡ãC
INSUTEX BULK FIBER
Bulk fiber is lightweight and high temperature resistant ceramic fibers made from high quality raw material, being used in resistance furnace, spinning or blowing.
TYPE STB & HT
Packing size 10kg/bag or 11kg/carton
Application Textile manufacture / furnace insulation/ expansion joint/ kiln car fill.
INSUTEX YARN

Yarn is manufactured from high quality ceramic fiber and reinforced by E-glass and stainless steel wire. Yarn include different types as follows:
YN-S525-2P: Stainless steel wire reinforced, 2-ply, 2.0mm
YN-G525-2P: glassfiber reinforced, 2-ply, 2.0mm

SIZE

Tex (g/km)

Ply

Thickness

525

2

2.0mm(0.080¡±)

630

2

2.5mm(0.098¡±)

1000

2

3.0mm(0.118¡±)

2000

1

3.0mm(0.118¡±)

2250

1

3.5mm(0.138¡±)

APPLICATION High temperature gasket, Production of textiles, Sewing thread for high temperature textiles

PACKING:

Packing in Paper Carton.